Seahorse will be showing a Buehler COOT 38 at the Pacific Sail and Power Boat Show, April 19th to the 22nd at Richmond CA
Driving a diesel powered yacht around the world can not be considered "going green". However, George Buehler's sail assisted Diesel Ducks not only leave a small footprint on our planet, they leave a lot more "green" in your bank account. If you want, we could paint your new Duck green.
Preliminary plans added to the picture section of our new Diesel Duck 492. A queen size luxury stateroom forward replaces the double bunk cabin. Pamper your guests!
Construction starting soon. Contact us for details.
Sellng direct without advertising or promotions means our prices are about one half those of similar passagemakers.
GEORGE BUEHLER'S POPULAR DIESEL DUCK 462 (51' LOA), A SEAHORSE EXCLUSIVE.
My favorite Diesel Duck design. George has out done himself with this Duck.
No more dinette living, the Diesel Duck 462's innovative interior includes separate galley, dining and large main saloon area. Unprecedented living space in a mid-size blue water passagemaker.
The 462 has a 48' waterline for superb tracking and higher displacement speeds. LOA is 51'.
John Deere Tier III 4045 125HP marine diesel, (other engines available) George's great steadying and "come home" rig, and Seahorse Marine's exquisite teak interior. More standard gear on the Diesel Duck 462 than any other passagemaker in her size range, many costing twice as much.
If you looking for a seaworthy passagemaker with very good live aboard capabilities check out the Diesel Duck 462.
Click on "FULL SPECS" for construction details and pictures.
LOD: 49 feet
LWL: 46.76 feet
Beam: 14.9 feet
Displacement 68,000 pounds dry
Engine(s): John Deere
Engine Model: 4045 Tier III
Engine HP: 125, commercial rating
Cruising Speed: 7-8
Max Speed: 9+
Spécifications, Équipements et informations supplémentaires:
Nom du bateau
Diesel Duck 462
Constructeur: Seahorse Marine
Architecte: George Buehler
Forme de la coque: Déplacement
Longeur hors tout: 51 Pied 0 Pouce
Maître bau: 14 Pied 11 Pouce
Longeur de ligne de flottaison: 48 Pied 0 Pouce
Tirant d'eau minimum: 6 Pied 0 Pouce
Tirant d'eau maximum: 5 Pied 6 Pouce
Déplacement: 70000 Livres
Tirant d'air: 13 Pied 9 Pouce
Hauteur sous barrots: 6 Pied 8 Pouce
Puissance totale: 125 HP
Marque moteur: John Deere
Modèle moteur: Tier III 4045
Type de moteur/essence: Diesel
Type de transmission: Prise directe
Puissance moteur: 125 HP
Vitesse de croisière: 7 Noeuds
Vitesse max: 8 Noeuds
Nombre de réservoirs d'eau: (250 Litres)
Nombre de réservoirs de carburant: (1800 Litres)
Nombre de réservoirs des eaux usées: 2 GRP (40 Litres)
Nombre de couchettes simples: 2
Nombre de couchettes doubles: 1
Nombre de toilettes: 2
Haut-parleurs de cockpit
Pompe de cale électrique
Chargeur de batteries
Pompe de cale manuelle
Pompe à eau de mer
Prise de quai
Circuit électrique: 24V
Échelle de bain
Coussins de cockpit
Length Overall: 51
Length at Waterline: 46.76'
John Deere 4045TFM tier III, 125 HP
Cruising Speed: 6 -8 Kts
Fuel: 1600 + gallons
DIESEL DUCK 462 FOOT STEEL TRAWLER YACHT
AVAILABLE FACTORY DIRECT PRICES, with limited warranty. Start your cruise from Hong Kong and apply the savings to your cruising budget. Or shipping with duty paid and full warrenty if desired.
The DIESEL DUCK 462 shall be specified by construction drawings provided by George Buehler and shall consist of no less than general arrangements and construction details, including the framing and gauge schedule. SEAHORSE MARINE MANUFACTURER, ZHUHAI will build the vessel to the above designer's specifications, plus selected factory modifications which have been approved by Mr. Buehler.
CONSTRUCTION: High quality ship steel shot peened or sand blasted inside and out, three coats of epoxy primer interior and exterior, four coats on the bottom, plus bottom paint and color top coat. Color scheme to owner's choice. Construction to China ship Classification Society (CCS) practice. CCS certified weld X-ray of all boats. CCS incline test.
All doors, hatches, ports and windows to be aluminum heavy duty commercial ship quality.
Windscreens to be 10MM toughened glass plate.
All plywood to be WBP grade or higher.
ENGINE: Standard engine JohnDeere 4045TFM, Tier III, 125 HP cylinder marine diesel with marine transmission. Complete engine instrumentation including high temperature, low oil pressure alarms.
Stainless shafts with thrust bearing and "U" joint carden shaft.
Prop aperture and engine mounting designed to minimize vibration and noise.
PSS Dripless shaft seal.
Sea water strainers and ball valve sea-cocks on all inlets.
Primary and secondary fuel filter.
Drip pan under engine.
Wet exhaust system with custom designed water lift muffler.
Quiet, large capacity engine room blower with noise isolated vents.
Steel fuel tanks, 1600+ gallons, well baffled and braced. Stainless steel ball valves at each end of fuel lines.
Fuel tankage built to Buehler's designed specs and well vented with single large deck fill.
Sound insulation surrounding engine room.
Stainless balanced rudder.
ELECTRICAL: Optional 9KW Northern Lights genset.
Separate heavy duty engine and dual house batteries connected by vapor proof master switches.
Back lighted custom made circuit breaker panel using high quality breakers.
Shore power master breaker is GFI (RCI) type for safety.
AC receptacles through out.
Indirect lighting and red safety lighting at steps.
Visual and audio warnings for all system mal-function including high water, engine water flow, ER overheat, any pump running, E R lights left on, etc.
Quality lighting fixtures.
All Seahorse Marine installed wiring is multi-strand tinned copper boat cable. Wires have color or marker codes for easy tracing.
Wire runs in conduit and all runs, except the bilge pump, are located as far above the waterline as possible.
All wire runs including those along the shear are easily accessible.
AC Toroidal Isolation transformer, 120/240 volt input and output.
Lightning protection system.
AC shore connector fitted starboard side. DC socket installed in pilothouse.
Multiple zinc’s on hull, standard size bolted, not welded.
International navigation lights and anchor light installed.
Red interior night safety lighting and remote control spot light installed. Pilothouse overhead lights have red night vision lighting as well as standard white bulbs.
Optional electronic and entertainment equipment can be planned in advance with owner so necessary wiring, grounds and cabinets can be built in.
Signal horn and windscreen wipers with fresh water wash.
WATER SYSTEMS: Water tanks P&S design installed with ball-cock shut off valves and vents designed to prevent salt water contamination.
Fresh water system uses neoprene coated metallic tubing, not plastic.
Stainless ball type sea-cocks on all thruhulls below the waterline.
Double all stainless clamps on all hoses below the waterline.
Hot water heater with electric and engine heat exchanger for domestic water supply.
High quality bath and galley fixtures. Electric toilets plumbed to holding tank.
BILGE PUMPS: Triple electric plus manual bilge pumps installed to Buehler’s design.
HEADS: Heads includes trouble free non-jamming electric toilets, showers, basins and storage.
Heads have power ventilation on timer switch.
Towel rails is to handrail strength.
Mirrors are fitted.
Toilet walls to be GRP laid up w/ epoxy or tiles over plywood.
Toilet flooring to be tile.
HULL LIGHTING AND VENTILATION: Built to Buehler's design and all to be aluminum frame opening hull ports with storm covers and windows, commercial ship quality.
Deck hatch(s) aluminum commercial ship quality, stainless handles.
Four commercial aluminum seadoors on interior bulkheads (5 watertight compartments total). Pilothouse entry sliding or dogged door.
DECK AND ACCOMIDATIONS
DECK: Steel pulpits, hand rails and boarding gate(s) built to Buehler's specs.
Stainless steel heavy bollards and chocks for lines, not painted steel.
Heavy dual anchor rollers at bow, two anchors provided.
24 volt Muir "Jaguar" electric windlass.
300' chain rode plus 300' 3/4" nylon with chain section, standard.
Interior to be of teak.
Indoor walls to be painted plywood w/ teak trim or to be teak plywood, owner’s choice.
All interior floors to be teak and holly flooring.
Bedroom, saloon, galley and toilet with hanging lockers, desks and storage where applicable. Hanging lockers and cabinets with louvered doors.
Mattress to be 5" thick, 4" for seats.
Drawers/storage under bed.
Reading lights and/or night lights aboard wherever applicable.
Hand rails fitted in proper locations, (stainless steel optional).
STEERING STATION: Raised helm seating with chart table.
Ventilation hatch over helm position.
Raised pilothouse dinette with well supported table.
Radar, antenna and steadying sail mast on top of pilothouse, Buehler's design.
Engine and gear controls in pilothouse.
Marine circuit breakers for all boat operations and for planned electronics installation, back lighted panel.
Teak wheel at helm, heavy duty hydraulic steering.
Windshield wipers on pilothouse window with fresh water wash.
Tinted side windows available on side windows on request.
Windshields are heavy safety glass.
(In order to incorporate improvements Seahorse Marine reserves the right to substitute features without notice.
Stella & Bill Kimley
Tel# (86) 756 550 1060
Fax# (86) 756 550 2145
Cell# (86) 1370 231 8640 (24/7)
*This price is based on today's currency conversion rate.