This very clean and well-maintained trimaran is a 34' version of the exceptional 54 Hammerhead. Extensive use of carbon fiber resulting in lightweight, stiff and strong construction throughout and minor improvements to the original interior layout. Chris White described this boats' finish quality as superb. Features an unweighted pivoting centerboard (as opposed to the typical vertical daggerboard found on most multihulls) and a pivot up rudder, which is ideal for sailing the shallow waters. Must see!
Built in New England by the original owners, she spent most of her life in New England. Her owners sailed her to Florida where she stayed for a year. The current owner bought her and sailed her in Florida and then decided to move her to San Diego. He removed the amas and mast and had her trucked to San Diego. Cost was approx. $10,000.
The accommodation layout sleeps up to 4 with a double bunk in the aft cabin and two singles forward. There is a comfortable saloon with a great view through large windows. Sailing performance is excellent. She has a pivot-up centerboard and rudder. This is very able cruising boat in a small package.
The construction consists of thin epoxy laminated plywood and foam. The decks of the amas use plywood and the top-side use foam. There is no solid fiberglass. The entire boat is core. There is a combination of foam and thin layers of plywood laminated with Epoxy. The entire boat is laid up with Epoxy. I was told by the builder that carbon fiber was used in high stress areas. The attachment points of the beams and the G10 tangs where the struts attach. The standing rigging is wire and the laterals are synthetic. The rig is fractional so the headsail is around 100%.
The boat is painted with Awlgrip 2 part polyurethane. The non-skid is Awlgrip material.
The bottom was last painted in 2016.
Both inspection ports in the salon give access to the water tank. The area ahead of the refrigeration box (located in the floor) is storage. It is also access to the bilge. There is cover under the stereo bookshelf area that gives access to the bilge. There is another area ahead of the mast. There is access to the bilge under the aft berth. The only electric bilge pump is in the engine compartment in addition to the pick up for the manual bilge pump. The manual pump is located in the cockpit.
Headroom in salon (5'10" in the small galley area, 4'3" anywhere forward of the galley.)
The diamonds were replaced November 2016. The shrouds may be original but when the mast was re-stepped in November 2016 the rigger thought they looked fine. The laterals were replaced using synthetic line around middle of 2017.
All of the running rigging was replaced in September 2018. The Lewmar Rope Clutches are original but in good working condition.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. Hours listed may vary from actual hours due to recent use. Purchaser is encouraged to verify hours prior to purchase. This vessel is offered subject to prior sale, price change, or withdrawal without notice.