Custom stainless fabricated mast collar with halyard attachment bar.
6 Harken mast collar turning blocks
Spinlock XTS triple rope clutches (PandS).
Two Harken pin stop cars mounted on Harken 2751 jib tracks with cheek blocks mounted on cockpit coaming forward of winches.
Floor mounted Harken mainsheet traveler track with 4:1 Harken traveler control system leading to cockpit vertical wall to Harken 150 cam cleats (PandS).
5:1 Harken mainsheet system leading to Harken 144 swivel cam base on a custom SS riser mounted on centerline aft of the traveler.
10:1 fine tune adjustment system.
Four 8" Herreshoff style SS mooring cleats.
Interior ventilation from two framed BSI Moonlight opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth. (option for 2 add'l cockpit opening ports).
Companionway opening with SS covered PVC slider tracks, large gutter drains, molded seahood with sliding cover.
Acrylic offshore removable dropboard in aluminum frame with inside/outside lockable hasp.
Cockpit operated manual bilge pump operable from the helm position with SS transom exhaust fitting.
Two polypropylene mesh line bags for halyard and sheet line tail storage.
Custom designed and fabricated SS chainplates, stemhead and backstay fittings.
Four (4) folding padeyes for attachment points of spinnaker blocks.
Custom SS bow and stern rails with Perko integral navigation lights.
SS removable stanchions with double lifelines PandS and at transom.
One AGM Group 27 battery (option for 2nd battery)
12V DC On/Off battery switch.
12V DC electrical distribution panel w/ 8 circuit breakers.
Navigation and steaming lights.
UL approved stranded, tinned copper ABYC color-coded wiring.
Bonding system to meet ABYC regulations.
Two swiveling reading lights in main cabin.
Two red/white dome lights
Automatic electric bilge pump and panel switch for manual operation.
Spars and Rigging
Hall Spars tapered aluminum mast, with double airfoil aluminum spreaders, main, jib and spinnaker halyard sheaves, luff track integral to section with mast finished in off-white Awlgrip.
G10 fiberglass mast step with fore/aft adjustment slots and SS padeye for through bolt securing of mast to step.
Aluminum boom with provision for 2 reefs, 8:1 internal mainsail outhaul in Awlgrip off-white.
Continuous rod rigging with adjustable shroud turnbuckles.
Running rigging package with main halyard, jib halyard, two jib sheets, main sheet, single line reef, traveler control lines, and centerboard pennant and control line.
Sailtec integral -8 hydraulic backstay adjuster.
Rigid boomvang with purchase
Harken MK IV Unit 0 headsail furler with control leading aft through 2 fairleads to Harken 150 cam cleat mounted on port cabin side.
Bowsprit prep package - internal fiberglass sprit tube installed with flush cover. Optional asymmetric spinnaker gear package includes carbon sprit, bearings, retrieval purchase, blocks and running rigging.
Off White main bulkhead with varnished teak trim, teak oval door opening with white door.
Teak and holly synthetic high-wear cabin sole in main cabin and head.
Teak trimmed storage bins outboard of each settee berth seat back.
Raritan PH-II marine head with 14 gal holding tank and "Y" valve.
Molded sink with overboard drain in head.
Choice of fabrics for settee cushions.
Vinyl liner finish on main cabin and head overhead and main cabin hull sides. Air dry gelcoat finish on hull sides in head and V-berth area and aft storage lockers.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.