Knotts Maid is a nicely presented example of the popular Tradewind 35 class. Fitted out to a high standard below decks with oak finished interior she feels bright and modern compared to other examples we have been aboard.
The Tradewind 35 is well proven design and has gained a cult following with those looking for a traditional style blue water cruising boat. The classic heavy displacement hull, long keel, full depth rudder, practical flush foredeck and deep well protected cockpit combine to create an easily controlled short handed cruiser. Examples can be found cruising in all corners of the globe with many being home to long term live aboards having completed multiple world circuits.
Currently afloat and in commission Knotts Maid is available for early viewing.
Rigged in the normal style for the class Knotts Maid is fitted with a single spreader mast head cutter rig, all spars being by Eurospars including telescopic spinnaker pole. All standing rigging is of stainless steel 1x19 wire construction with roll swage type terminations. Roller reefing systems are fitted for both headsails.
Mainsail - Slab reefing. Owen Sails 2008.
Genoa - Roller furling. Owen Sails 2012.
Working Jib - Roller furling. Westaway sails.
Cruising Chute - With snuffer. Owen Sails 2007.
Main Anchor - 16kg CQR on 50m 3/8" chain rode
Kedge Anchor - 18kg Fisherman style anchor on 50m anchor braid rode.
Mooring warps - selection
Fenders - selection
Jackstays - webbing type
Force 10 BBQ - All stainless steel with rail mount
Built in the traditional style both the hull and deck mouldings are made of hand consolidated heavy weight GRP mouldings finished externally in an off white gelcoat.
Below the waterline as you would expect from a classic cruiser type design she has a full length moulded keel with encapsulated lead ballast. The substantial rudder runs the full depth of the keel being supported on a skeg at the aft end of the keel. The propellor is protected with an appeture.
On deck the deck moulding is again finished in the off white gelcoat with non-slip panels of treadmaster material neatly applied. Around the deck edge the moulded toerail is fitted with a solid teak capping rail, brass chafe protection strips have been fitted to protect the boat in way of mooring cleats etc. The deep cockpit has laid teak on the seats and sole with a solid teak capping to the coaming.
Finished in gelcoat with treadmaster style non-slip paneling and varnished capping rail with substantial guardwires and 'granny bars' at the mast the boat has a very purposeful appearance.
A stout twin roller stem head fitting allows stowage of the anchor on the bow while maintaining the ability to pick up moorings. The horizontal deck mounted electric windlass handles the anchor chain, self stowing in a below decks locker. Aft to the mast the decks are unobstructed and easily moved around with jackstays providing crew with a secure anchoring point.
With all halyards and reefing lines handled at the mast substantial 'granny bars' are fitted in way of the mast to keep crew safe while forward. Winches for line handling are mounted on the port and starboard sides of the mast. The mainsheet traveller is mounted on the coachroof aft with the mainsheet and car control lines lead aft into the cockpit.
Access to the cockpit is via either side of the coachroof. A relatively small sprayhood secured on top of the coachroof provides additional protection for the cockpit. The cockpit itself is very traditional in style with deep moulded coamings running around the full cockpit and extending almost to the full width of the deck; the coamings are capped with solid timber giving a nice classic finish. The pedestal and wheel are located centrally in the cockpit with seating provided all around the cockpit. Lockers are provided under the port and starboard side seats. A short section of aft deck extends aft from the cockpit to the transom. A substantial gantry overhead at the aft end of the boat provides mounting for the wind generator and solar panels.
With the the Tradewind 35's being predominately sold in kit form the quality of finish and layout can vary. Knotts Maid however is one of the best examples we have seen in recent years with the interior fit out to a good standard and the layout obviously to suit short handed offshore cruising. All the interior joinery work has been constructed from oak which lightens the interior and contrasts nicely against dark upholstery while retaining a very classic feel.
The forepeak provides a generous single berth port with an infill section dropping in to create a very good sized double berth. With the infill section not in place a small seat is provided to starboard beneath and good selection of storage lockers. There is no door separating the forepeak from the rest of the boat and a passage way leads directly aft to the saloon with the heads accessed to port and a sensible hanging locker to starboard.
Located to port the heads compartment is finished in a white moulding with varnished timber trims and locker doors finishing the traditional look. The heads compartment is appointed with sea toilet, basin, pressurissed hot and cold faucet also serving as a shower head. Storage is provided with lockers under the sink and outboard.
The saloon is stepped down into the hull from the elevated galley and nav station. Laid out in a traditional manner bench style seating is provided along port and starboard sides of the saloon with a drop leaf table centrally mounted, passage forward is made along the starboard side. Both bench settees convert to create well sized single berths with a trotter box providing additional length on the port side bunk. Beneath and outboard of the seating storage is provided. A semi enclosed pilot berth is provided outboard of the port settee.
Located to starboard of the companionway is the nav station complete with chart table and forward facing navigators seat. Chart storage and bosuns drawers are provided within the char table while additional lockers are provided aft of the seat. Ships switch panel, VHF and radar display are all easily to hand for the navigator.
Opposite the nav station is the compact galley area appointed with gas cooker, top loading fridge and twin sinks. Provided storage has been obviously designed for use at sea with sensible fiddles fitted on shelves and hanging fruit baskets.
To access the engine space the companionway steps are removed and the sole panel beneath lifts clear to allow full access to the sound insulated compartment from above. A small panel forward can be removed allowing better access to the forward end of the engine.
Domestic Bank - 2 off 120Ah Lead Acid type. (2015)
Engine Bank - 1 off Lead Acid Type. (2014)
'Knotts Maid' has served us well during the last 14 years and it is very reluctantly we have made the hard decision to sell her. We were looking for a serious cruising yacht and having completed a Transatlantic circuit with her previous owner she more than met our needs.
During our ownership we have had many memorable seasons cruising around Scotland's coastline exploring the inner and outer Hebrides; as far West as St Kilda. During 2008 and 2012 we based the boat in the Scandinavian countries and extensively cruised the waters around Norway before moving her to the Baltic sea and exploring the coast of Sweden, Finland, Denmark and the Aland Isles. During these cruises we have sailed her in all conditions, often short handed and have always felt safe with the boat being very sea kindly and predictable.
In this case we are acting as brokers only. The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.
This vessel is offered subject to prior sale, price change, or withdrawal without notice.